Accessories | آجرنماچین | آجر | آجرنما | آجر نسوز

Nano hydrophobic coating WH100, WN100

The facade protector with codes WN100, WH100 belongs to the family of nano coatings, its base materials are from reputable companies of the European Union, a non-toxic product containing modified alkaline cement, nano technology, soluble in water with a very high permeability, which has an extraordinary hydrophobic effect. It provides all levels of building facade. This product creates a hydrophobic coating by creating a reaction and penetration in the pores of concrete, cement, stone, brick and surfaces with low absorption and causes the formation of an integrated and impermeable membrane against water. As a result, it protects surfaces against structural and appearance damage caused by moisture absorption, such as dandruff, freezing, fungus and mold growth, etc.

- Quality indicators

These materials are permeable and do not act as a cover (surface film). Rather, materials with a permeable process give surface water repellency to the facade of the building.
It makes the building resistant to stains and surface pollution.
These materials are nanoscale and do not prevent the building from breathing, and therefore do not block the flow of air and water vapor to the outside of the building.
It is quick and easy to implement.
It is resistant to acid rain, environmental pollutants and dust.
It is odorless and chemical-free and environmentally friendly.

It has a long shelf life and with the passage of time, the facade of the building does not change color.
It is resistant to cold and heat and UV rays.
It is resistant to acids and chemicals and prevents the penetration of colors into the body of the facade.
It is anti-algae, moss and bacteria.
It is soluble in water with a penetration depth of about 3-5 mm.
It is perfectly suitable for concrete, brick, etc.
After using these materials on the building, the color of the building does not change.

Nano hydrophobic coating WN110

The facade protector with the code WN110 belongs to the family of nano coatings, whose basic materials are acrylic and silicone resins, and nano technology is included in it. Its solvent base is water and it provides an extraordinary water repellency effect along with wet condition to all surfaces of the building facade. By creating a reaction on concrete, cement, stone, brick surfaces and surfaces with low absorption, this product creates a hydrophobic coating and creates a membrane that is impermeable to water. As a result, it protects surfaces against structural and appearance damage caused by moisture absorption, such as dandruff, freezing, fungus and mold growth, etc.

Quality indicators

It has water-repellent and dust-repellent surface properties
This solution gives the facade of the building including brick, stone and cement a wet state, you create freshness and newness in the facade of the building.
The coverage is excellent and the drying speed is high.
It makes the building resistant to stains and surface pollution.
These materials are on the scale of nano particles and do not hinder the breathing of the building. Therefore, it does not block the flow of air and water vapor to the outside of the building.
It is quick and easy to implement.
Perfectly suitable for concrete, brick and…
Resistant to different weather conditions

anti-writing (easy to clean spray paint from the surface)
It is resistant to acid rain, environmental pollutants and fine dust.
It is odorless and chemical-free and environmentally friendly.
It has a long shelf life and with the passage of time, the facade of the building does not change color.
It is resistant to cold and heat and UV rays.
It is resistant to acids and chemicals and prevents the penetration of colors into the body of the facade.
Anti-algae, moss and bacteria
Soluble in water and compatible with the environment

Cleaner and anti-dandruff WN200 / WN210

Quality indicators

Cleaner of all cement, grout and mortar stains on brick surfaces
Cleaner of all dander on brick surfaces
It does not change the color of the facade.
High cleaning power

High speed of action
Not creating dust and noise compared to sand plus or wear face methods
Reasonable price compared to other face cleaning washes

Tile, ceramic and brick paste adhesive GN200

Paste glue with code GN200 is from the family of products of Ajrnamachin Group of Factories, which is produced using the latest European technology. Its physical and chemical properties are controlled during the industrial process, and it has homogeneous and unique properties and characteristics, and it is used for the execution and installation of all kinds of bricks, tiles and ceramics vertically and horizontally for interior decoration.

Quality indicators

This product has special chemical compounds that, in addition to creating elastic properties and increasing flexibility against the physical stresses of the building, it has greater adhesion, which is clearly visible.
Easy and convenient implementation

Very high initial adhesion property
The small volume of this product compared to building materials
High execution speed
Help to stylize the building

Crusader

One of the most important things in the beauty and strength of surfaces that are covered with tiles, ceramics, brick or stone is the presence of equal distance between each tile or stone. Brick-faced spacer is a product that is specially produced for use in the implementation of tile, ceramic, brick-faced and stone coverings to create a uniform bond according to the taste and needs of the consumer.
The use of these spacers creates a very beautiful appearance at the end of the work. The brick spacer or brick cross is made of 3 layers with a thickness of 10 mm from compressed plastic, and there are 500 pieces in each package of this product, and for It is very suitable to use in brick bands and creates regular bands and intervals between bricks during installation. Also, the brick cross, in addition to being used in brickwork, can also be used in tile works whose joints are not in the form of +.

The method of using brick-faced spacer is in such a way that during the installation of bricks, brick-faced glue is first applied on the lower surface. Then the first brick is plumbed from one side and installed. The brick cross is placed between the bricks during the installation of the bricks, and after the bricks are installed and tied, it is removed with a sharp object.

After installing and finishing the brick work and drying the brick adhesive and ensuring that the bricks stick to the floor, a brick cross or a brick spacer can be selected according to the client’s taste and the desired type of fastening. The consumption of brick cross is equal to the number of brick, tile and ceramic bands. Failure to use a brick-like cross or brick-like spacer during tiling will cause irregular seams and bands with different intervals.

Tile and brick glue GN100

GN100 brick adhesive includes two grades GN100_AH and GN100_WH, where GN100_AH is a gray powder adhesive and GN100_WH is a white powder adhesive. This glue has high resistance, which makes it non-falling and long-lasting.

Central Office of Factory

Phone Call: +9831-35493001-6

info@nemachin.com